Toro’s M-Model container covers use cold-formed steel frame construction to transform standard shipping containers into protected, multi-functional space — a covered workshop, equipment shelter, or storage area, without building a separate structure. Toro supplies the engineered roof system; you or your local contractor supply the shipping containers themselves and complete the foundation using the structural reactions Toro provides. They come in three mount styles, each suited to a different balance of footprint and coverage: Inside-Mount, Inside-Mount with Lean-Tos, and Outside-Mount.
Inside-Mount: A Streamlined, Enclosed Solution

The standard M-Model configuration mounts within the inner edges of the container tops, creating a fully enclosed structure with a lower overall height and a clean, integrated profile.
- Secure, weather-resistant enclosure
- Lower overall height — ideal for space-restricted areas
- Clean, integrated look that complements existing storage setups
- Prefabricated kit designed for DIY assembly
This option works well for construction sites, equipment storage, and temporary workspaces that need weather protection without extending beyond the container footprint.
Inside-Mount & Lean-Tos: Expanded Coverage

For projects that need more covered area, the Lean-To configuration adds structures extending outward along the top edges of the containers, fully supported on the outside. This configuration requires a 4-foot vertical wall height from the inside edge of the container tops to maintain structural integrity.
- Maximizes usable space with additional covered side areas
- Good for equipment storage, workstations, or vehicle protection
- Retains the streamlined inside-mount look while adding functionality
- Shields container tops from weather exposure on both the main cover and lean-to areas
This style suits businesses or individuals who need extra covered space while keeping a central enclosed area — one of the most versatile configurations available.
Outside-Mount: Maximum Coverage

The Outside-Mount configuration mounts on the outer edges of the containers, creating a wider structure with maximum interior space and clearance.
- Larger open area beneath the cover
- Increased overall height and width for greater clearance
- Ideal for workshops or vehicle storage needing ample sheltered space
- No interior supports obstructing movement — good for manufacturing, logistics, or agricultural storage
Comparing the Three Styles
| Style | Best For | Key Requirement |
|---|---|---|
| Inside-Mount | Compact, enclosed shelter | None beyond container tops |
| Inside-Mount + Lean-Tos | Extra workspace + weather protection | 4-ft vertical wall height |
| Outside-Mount | Maximum open interior space | Wider footprint than containers |
How Many Containers Do You Need?
An M-Model cover spans between a minimum of two shipping containers, with the cover length determined by how many containers you line up beneath it — most projects use standard 20-foot or 40-foot containers, and mixing container sizes under one cover is possible as long as the tops align at a consistent height. More containers means more covered floor space without adding another cover system, which is part of why this configuration works well for businesses that already use containers for storage and want to add usable space between them rather than build something separate. Your Building Specialist can confirm the exact span and configuration for your specific container count and layout.
Why Steel Over a Tarp or Wood-Framed Cover
Tarps and canvas covers are the cheapest way to shelter space between containers, but they’re also the shortest-lived — UV exposure and wind loading break down fabric within a few seasons, and most aren’t engineered to any real snow load at all. A wood-framed lean-to lasts longer but comes with the same rot, pest, and fire exposure wood carries everywhere else, plus ongoing maintenance a steel frame doesn’t need. An M-Model cover is engineered once, to your site’s actual wind and snow loads, and — because it’s a genuine structural system rather than a tarp stretched over posts — it holds up as a long-term addition to your property rather than something you’re replacing every few years.
Permits, Codes & Engineering
M-Model covers use cold-formed steel frame construction, which falls under specifications jointly published by the American Iron and Steel Institute (AISI) and CSA Group. Design loads for wind, snow, and seismic conditions trace back to the ASCE 7 standard from the American Society of Civil Engineers, referenced by the International Code Council‘s International Building Code, or in Canada, the National Building Code of Canada. Toro’s in-house engineering team — precision-manufacturing every cover rather than outsourcing to a third party — sizes each one for its specific site location before it ships.
Choosing the Right Style for Your Needs
Inside-Mount offers a compact, enclosed shelter; the Lean-To variation adds workspace and weather protection; Outside-Mount delivers maximum coverage for large-scale operations. All three are engineered, DIY-friendly kits built for simple nut-and-bolt assembly — installation is handled by you or your local contractor, with Toro’s team available to help you weigh which style actually fits your project.
Related Building Types
Container Covers | Container Cover Mounting Options | Container Trusses for Covered Parking | Quonset Hut Buildings
Ready to Build Your Container Cover?
Whichever configuration fits your project, Toro Steel Buildings engineers every M-Model cover to your site’s exact requirements. Request a free quote to get started.

